Does 461 give you the test setup with loads et al? Bob Heller 3M EMC Laboratory, 76-1-01 St. Paul, MN 55107-1208 Tel: 651-778-6336 Fax: 651-778-6252 =================================
From: Ken Javor <[email protected]> To: <[email protected]> Date: 08/22/2012 04:03 PM Subject: Re: "Smart" Batteries Sent by: [email protected] In both cases, the battery was procured as a separate item, so it was tested that way. Ken Javor Phone: (256) 650-5261 > From: Brian Oconnell <[email protected]> > Reply-To: <[email protected]> > Date: Wed, 22 Aug 2012 13:46:31 -0700 > To: <[email protected]> > Subject: RE: "Smart" Batteries > > Ken, > > For MS461, did you test the batteries as a seperate item, or as part of a > charger or the end-use unit? > > Brian > > -----Original Message----- > From: [email protected] [mailto:[email protected]]On Behalf Of Ken Javor > Sent: Wednesday, August 22, 2012 10:55 AM > To: [email protected] > Subject: Re: "Smart" Batteries > > Not what you personally are looking for, but in the military world > MIL-STD-461 applies to such batteries just as to any other item that > contains electronics. I have tested them and found them susceptible, albeit > at field intensities much higher than required in the commercial world. > > Ken Javor > Phone: (256) 650-5261 > > > > From: <[email protected]> > Date: Wed, 22 Aug 2012 11:43:03 -0500 > To: <[email protected]> > Subject: "Smart" Batteries > > Can someone tell me if there are any EMC standards for the so-called "smart" > batteries? These are batteries that communication with the charger or EUT > for charge rates, time left, overheating, etc. > > Thanks, > Bob Heller > St. Paul, MN 55107-1208 > Tel: 651-778-6336 > Fax: 651-778-6252 > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
