That is simply not true in the general case. What about a 28 Vdc battery that backs up the essential bus on an aircraft? What about a MANPACK battery that is discharged while being worn, and connected to a mains or generated-powered charger after the mission is over.
In the commercial world, what about a battery designed to be used in an UPS? I have purchased several replacement batteries designed to replace the OEM battery in same. Ken Javor Phone: (256) 650-5261 From: Cortland Richmond <[email protected]> Reply-To: <[email protected]> Date: Thu, 23 Aug 2012 11:58:15 -0400 To: <[email protected]> Subject: Re: "Smart" Batteries "Smart" batteries are electronic subassemblies that don't work properly outside of the equipment in which they are meant to be used and must be tested in it. Cortland Richmond On 8/22/2012 1243, [email protected] wrote: > Can someone tell me if there are any EMC standards for the so-called "smart" > batteries? These are batteries that communication with the charger or EUT for > charge rates, time left, overheating, etc. > > Thanks, > Bob Heller > St. Paul, MN 55107-1208 > Tel: 651-778-6336 > Fax: 651-778-6252 > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
