On 5/12/2013 12:39 PM, John Woodgate wrote:
In message <[email protected]>, dated Sun, 12 May 2013,
Richard Nute <[email protected]> writes:
As for the requirement for the GDT to pass the hi-pot test...
??? I don't have any rationale for this.
If its seal was broken, letting the magic gas out, would it arc over
at a lower voltage?
Depends on what's left in the GDT, if anything.
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
