In message <[email protected]>, dated
Fri, 21 Mar 2014, Amund Westin <[email protected]> writes:
A manufacturer of a product listed within the scope of CPR (former CPD)
shall issue a Declaration of Performance. In addition, the manufacturer
shall issue a Declaration of Conformity covering the EMC and LVD (if
applicable).
In the past, a DoC could include references to CPD, EMC and LVD. Now,
it has to split into two documents.
It appears so; 'conformity' is not appropriate for the CPR. But the two
'document's can be on the same piece of paper (unless some idiot decides
otherwise).
--
OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk
Nondum ex silvis sumus
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
