Hi Charlie, Regardless of NFPA 79 being applicable or not, you will still want to select another product safety standard as NFPA 70 will not address the product completely. I do not know enough about the product based on your description to suggest an appropriate standard.
Best Regards, Jody Leber Consumer Testing Services Global Battery and Accumulator Technical Manager Battery, Energy Efficiency and Performance Laboratory Manager Direct: 770.570.1838 Main: 770.570.1800 Mobile: 678.469.9835 From: Charlie Blackham [mailto:char...@sulisconsultants.com] Sent: Wednesday, October 08, 2014 6:13 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Scope of NFPA 79 All I'm trying to determine whether a product falls within scope of NFPA79 for USA. EU Machinery Directive determines whether a product is within scope by what it does, but my reading of NFPA79 is that the latter also considers "what it does it to". Looking at the 2015 version, NFPA79, Chapter 3, section 3.3.54 defines 'Industrial Machinery' as: " A power-driven machine (or group of machines working together in a coordinated manner), not portable by hand while working, that is used to process material by cutting; forming; pressure; electrical, thermal, or optical techniques; lamination; or a combination of these processes. Machine can include associated equipment used to transfer material or tooling, including fixtures to assemble/disassemble, to inspect or test, or to package. [The associated electrical equipment, including the logic controller(s) and associated software or logic together with the machine actuators and sensors, are considered as part of the industrial machine.]" The product in question processes gases (in silicon wafer and flat panel manufacturing plants) - so I don't think it processes "material". If that is the case, it would be outside scope of NFPA79, and just within scope of NFPA70. Comments? regards Charlie Charlie Blackham Sulis Consultants Ltd Tel: +44 (0)7946 624317 Web: www.sulisconsultants.com<https://outlook.hslive.net/owa/redir.aspx?C=02be3bf3e3a544d1bdf7b6c99fbd12f5&URL=http%3a%2f%2fwww.sulisconsultants.com%2f> Registered in England and Wales, number 05466247 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net<mailto:emcp...@radiusnorth.net>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> Information in this email and any attachments is confidential and intended solely for the use of the individual(s) to whom it is addressed or otherwise directed. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the Company. Finally, the recipient should check this email and any attachments for the presence of viruses. The Company accepts no liability for any damage caused by any virus transmitted by this email. All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>