Marine battery charger. As in boats. Sea level works just fine...
Ken Javor Phone: (256) 650-5261 From: Boštjan Glavič <[email protected]> Reply-To: Boštjan Glavič <[email protected]> Date: Tue, 11 Jun 2019 03:50:35 +0000 To: <[email protected]> Conversation: [PSES] Does anyone make this filter? Subject: Re: [PSES] Does anyone make this filter? Dear all, Just one comment to use of such filter. Most of the filters are approved up to 2000m, what cannot be seen from the datasheet. If you design a product for altitude above 2000m, additional investigation of the filter is required. This is sometimes hard task. Best regards, Boštjan From: Grasso, Charles [mailto:[email protected]] Sent: Monday, June 10, 2019 10:04 PM To: [email protected] Subject: Re: [PSES] Does anyone make this filter? Well we did create Monty Python!! Ken - I am shocked that cannot find the filter you described in the commercial field. As an example I have attached a copy of one filter that fits one of the filter designs you describe located at DigiKey. I would be interested to know if and why this may not be an acceptable solution. Never too old to learn. Thanks! Charles Grasso W: 303-706-5467 From: Ken Javor [mailto:[email protected]] Sent: Sunday, June 09, 2019 1:08 PM To: [email protected] Subject: Re: [PSES] Does anyone make this filter? This message originated outside of DISH and was sent by: [email protected] Gotta love that dry Brit humor :-) Ken Javor Phone: (256) 650-5261 From: John Woodgate <[email protected]> Date: Sun, 9 Jun 2019 19:59:14 +0100 To: Ken Javor <[email protected]>, <[email protected]> Subject: Re: [PSES] Does anyone make this filter? It's worth trying, since a custom design is ruled out. In my case, they found two of the transformers on the shelf of 'old products'. They had a smaller product in the current catalogue, but, as in your case, my budget wouldn't run to that. I didn't know that US marines run on batteries. I assumed it was hydrazine. Best wishes John Woodgate OOO-Own Opinions Only J M Woodgate and Associates www.woodjohn.uk <http://www.woodjohn.uk> <http://www.woodjohn.uk> Rayleigh, Essex UK On 2019-06-09 19:48, Ken Javor wrote: > Re: [PSES] Does anyone make this filter? I have done exactly that in the past > (well, not the beer part) when working a mil or aerospace program, because I > know that the filter manufacturer can price the lot to where they can get back > their NRE on development. > > But here the customer is expecting to pay maybe $5 US max for a filter, and > this product being a marine battery charger, is not going to be high volume, > so I don't feel comfortable asking for a custom design. > > I understand that they may have some design they worked on that isn't in the > catalog, and that may be worth pursuing. > > Ken Javor > Phone: (256) 650-5261 > > > > > > > From: John Woodgate <[email protected]> <mailto:[email protected]> > Reply-To: John Woodgate <[email protected]> <mailto:[email protected]> > Date: Sun, 9 Jun 2019 19:37:14 +0100 > To: <[email protected]> <mailto:[email protected]> > Subject: Re: [PSES] Does anyone make this filter? > > > > You could try contacting the filter manufacturers directly, if you haven't > done that already. Maybe one of the smaller, 'try harder' outfits would be > more willing to help. Many manufacturers have products that they made in the > past but don't advertise. I won out on a costly transformer that way; > admittedly it was 'negotiated' over beer, but resulted in a $100 part for > free. > > > Best wishes > John Woodgate OOO-Own Opinions Only > J M Woodgate and Associates www.woodjohn.uk <http://www.woodjohn.uk> > <http://www.woodjohn.uk> <http://www.woodjohn.uk> > Rayleigh, Essex UK > > On 2019-06-09 18:31, Ken Javor wrote: > > > >> Re: [PSES] Does anyone make this filter? To all who responded, >> >> I was really hoping for a bulkhead mount type pi or T-type filter but using >> a cm choke, and feedthrough caps, or similar, to get really high performance >> at high frequencies, coupled with minimal size. >> >> Never found anything like that, and as I said, this is a commercial >> application and not terribly large production, so a custom filter is not >> realistic. >> >> Thanks to all who responded. >> >> Ken Javor >> Phone: (256) 650-5261 >> >> >> >> On Wed, Jun 5, 2019 at 11:21 PM Ken Javor <[email protected]> >> <mailto:[email protected]> <mailto:[email protected]> >> wrote: >> >> >>> Working a little outside my experience area. >>> >>> Trying to help someone meet FCC Class A RE limit. Device is an off-line >>> battery charger, failing RE 30 - 200 MHz. Conducted emissions on output >>> leads (24 / 36 Vdc @ up to 25 A) are too high to meet RE limit. Trying to >>> snub sources is not my thing and they are not interested in that at his >>> point. I am trying to contain the noise. Plan is to provide a metal >>> bulkhead with a bulkhead-mount common mode only filter rated for 50 Vdc and >>> over 25 A, but filtering only at and above 30 MHz. >>> >>> Trouble is, I can't find such a filter off-the-shelf with commercial >>> rating and commercial price. >>> >>> Can anyone suggest a vendor of such? >>> >>> Thank you, >>> >>> Ken Javor >>> Phone: (256) 650-5261 >>> >>> - >>> ---------------------------------------------------------------- >>> >>> This message is from the IEEE Product Safety Engineering Society emc-pstc >>> discussion list. To post a message to the list, send your e-mail to >>> <[email protected]> >>> >>> All emc-pstc postings are archived and searchable on the web at: >>> http://www.ieee-pses.org/emc-pstc.html >>> >>> Attachments are not permitted but the IEEE PSES Online Communities site at >>> http://product-compliance.oc.ieee.org/ can be used for graphics (in >>> well-used formats), large files, etc. >>> >>> Website: http://www.ieee-pses.org/ >>> Instructions: http://www.ieee-pses.org/list.html (including how to >>> unsubscribe) <http://www.ieee-pses.org/list.html> >>> List rules: http://www.ieee-pses.org/listrules.html >>> >>> For help, send mail to the list administrators: >>> Scott Douglas <[email protected]> >>> Mike Cantwell <[email protected]> >>> >>> For policy questions, send mail to: >>> Jim Bacher <[email protected]> >>> David Heald <[email protected]> >>> >>> >> >> - >> ---------------------------------------------------------------- >> >> >> This message is from the IEEE Product Safety Engineering Society emc-pstc >> discussion list. To post a message to the list, send your e-mail to >> <[email protected]> <mailto:[email protected]> >> >> >> All emc-pstc postings are archived and searchable on the web at: >> http://www.ieee-pses.org/emc-pstc.html >> >> >> Attachments are not permitted but the IEEE PSES Online Communities site at >> http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used >> formats), large files, etc. >> >> >> Website: http://www.ieee-pses.org/ >> Instructions: http://www.ieee-pses.org/list.html (including how to >> unsubscribe) <http://www.ieee-pses.org/list.html> >> List rules: http://www.ieee-pses.org/listrules.html >> >> >> For help, send mail to the list administrators: >> Scott Douglas <[email protected]> <mailto:[email protected]> >> Mike Cantwell <[email protected]> <mailto:[email protected]> >> >> >> For policy questions, send mail to: >> Jim Bacher <[email protected]> <mailto:[email protected]> >> David Heald <[email protected]> <mailto:[email protected]> >> >> > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> <mailto:[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> <mailto:[email protected]> > Mike Cantwell <[email protected]> <mailto:[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> <mailto:[email protected]> > David Heald <[email protected]> <mailto:[email protected]> > > - > ---------------------------------------------------------------- > > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
