Hi Ray,
Glad to be here. Thank you for the fast reply.
I can get classic ladder to come up in demo_step_cl and
demo_sim_cl. I guess my question is more about the configuration files for
Motenc card. When I look at the moten_io file it reads:
# Just uncomment the following line if you want a Software PLC
#loadusr -w classicladder --nogui ../configs/common/bridgeport.clp
So I edit it to read:
# Just uncomment the following line if you want a Software PLC
loadusr -w classicladder --nogui ../configs/common/bridgeport.clp
But I still don't get the classic ladder interface.......What am I doing
wrong?
Thanks,
Dave
----- Original Message -----
From: "Ray Henry" <[EMAIL PROTECTED]>
To: "Enhanced Machine Controller (EMC)" <[email protected]>
Sent: Sunday, October 21, 2007 6:54 PM
Subject: Re: [Emc-users] Starting a new project
>
> Hi Dave
>
> Welcome. This is a good place for help as is the IRC channel on
> freenode.net.
>
> There are both realtime and user space elements to ladder. The realtime
> stuff does the actual logic while the user space stuff shows and edits
> it.
>
> Both demo_step_cl and demo_sim_cl should start a user space set of
> windows into classic ladder. I believe there is still a page on them in
> the wiki.
>
> http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Sample_HAL_And_ClassicLadder
>
> It's a bit dated because there have been some changes to the way that
> ladder handles variable names but the essence of the interaction between
> EMC and ladder are in there.
>
> Rayh
>
>
>
>
> On Sun, 2007-10-21 at 18:33 -0400, Dave Keeton wrote:
>> Hello,
>>
>> I am new to both Linux and EMC. I am a maintenance supervisor
>> in an aircraft manufacturing facility. We do landing gear. I have a
>> Motenc-Lite servo board. I am pretty sure I won't have alot of
>> problems with the motion control section of this but was wondering
>> about how to use a manual pulse generator and jog push buttons. How
>> would I tie hard pushbuttons to the soft buttons on tkemc? Also,
>> classic ladder does not start when I bring up the EMC2 Sample config.
>> How do I do this?
>>
>>
>> Thanks,
>> Paul
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by: Splunk Inc.
>> Still grepping through log files to find problems? Stop.
>> Now Search log events and configuration files using AJAX and a browser.
>> Download your FREE copy of Splunk now >> http://get.splunk.com/
>> _______________________________________________ Emc-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems? Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >> http://get.splunk.com/
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
