Sebastian et al,

I had just got the stepper outputs working before I went on vacation and am
just now getting back to it. I am using Hostmot2, the m5i20 board and
SVST8_4 configuration, configured for 2 steppers, 1 pwm and no encoders. I
am also using just the patch applied to the most recent binary packages, I
have not rebuilt from the latest source.

It looks like I am now having a problem with the PWM output and hope I am
just doing something stupid.

With the standard m5i20 configuration, all I had to do was to assert the
enable and set the value for the selected PWM. When I do this with the
hostmot2 configuration, I get no output on the associated pin (pin 15 for
PWM 0).

If I use the standard m5i20 configuration the output works correctly.

Any ideas?

Thanks,
Eric


-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to