Sebastian, >> Next I'd want to check the electrical state of the IO pins. With SVST8_4, pwmgen.00 appears on pins 15 (PWM), 19 (Dir), and 23 (Not Enable). Bust out a voltmeter and carefully hook it to pin 23. Then twiddle pwmgen.00.enable high and low and see if the voltage on pin 23 varies as expected (0V when .enable is 1). <<
The enable pin appears to work properly. When enable is set to false pin 23 is high, when enable is true pin 23 is low. Regards, Eric ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
