-----Original Message----- From: Dave Houghton [mailto:[EMAIL PROTECTED] Sent: 31 October 2008 09:59 PM To: emc-users@lists.sourceforge.net Subject: [Emc-users] Following error
Hello all I've just configured my Sherline mill using the 'stepconf wizard' It is a metric mill and the set up is metric. I'm in "AXIS" loaded:arcspiral.ngc (I like watching things going in circles reminds me of me) run program Z=11.899 and the vel:2970 then I get Axis error "joint 2 following error" I think that velocity is a bit quick, considering I set it to 450max. I haven't connected the mill yet. Any answers please, and is there a list of error codes explaining what they mean - might be useful. Dave It's me again in the set up 'stepconf wizard' I put the velocity as 450 meaning 450 mm/min 'stepconf wizard' wants it in mm/second. Sorry folks; seems to be OK now. Thought the velocity was fast! Dave ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
