-----Original Message----- From: John Thornton [mailto:[EMAIL PROTECTED] Sent: 01 November 2008 07:25 PM To: Enhanced Machine Controller EEMC" Subject: Re: [Emc-users] Following error
Hi Dave, I have a section of the manual that I'm working on that covers the following error. However it has not made it to the web site yet. Essentially in a stepper system you get a following error if the PC can not generate the step pulses at the requested rate. There are so many error codes that a list would be impossible to maintain. I'm attempting to gather up the more common or misunderstood ones and add them to the manual. John Hi John The 'following error' was sorted - thanks I put the velocity in the 'stepconf' per minute; required per second - so 60x too fast. (Gave a top speed of 27000 mm/min). Regards Dave ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
