El 21/12/2008 05:45 p.m., Peter C. Wallace escribió: >> When going your lazy path i got the following two messages. >> "Acercar linea 10 en /usr/shareaxis/images/axis.ngc: bad character "x" used" >> > No Idea, I sure didnt see anything like this. > > Is this a new 2.2.8 installation? Maybe its corrupted in some way > > Mine was absolutely new. I would suggest starting fresh as that worked > instantly for me. > Every time id did this before, i made clean installs... this is the first time i dont reinstall the entire Linux. I just apt-get remove emc2 --purge then apt-get install emc2, so it wouldn't be corrupted since is the same as using install_emc.sh.
>> "RTAPI:: ERROR: Unespected realtime delay on task 1 >> This Message will only display once per session. >> Run the Latency Test and resolve before continuing" >> > > This likely means that you _DO_ need to run the latency test as your > motherboard as currently set-up is causing delays in real time scheduling > > And... where is that? > >> And all lights are always ON as they are from startup. >> >> When using the old driver/firmware on 2.2.6, at least lights went off, >> then init and done turned on, this time, nothing. When using the config >> samples provided by Ted Hyde, lights go off and never come back on, and >> then the "Unknown Command Error". >> >> It seems to me, that firmware is not loading at all >> > > Thats what "all lights on" means > All lights on?... when i boot my computer, the board starts with all lights on. Then Ted Hyde sent me his config. and hal files, then started to test with it. When using 2.2.6 lights(init and ready) went off and then on in the sequence first init and then ready, then stayed on It was giving the "unknown command" in some line (posted in pastebin) and all of you said it was because the 2.2.6 version, also was some kind of "look the imbecil" the commentaries i read about. On 2.2.7 (as all of you said) and also 2.2.8, using the SAME files that i was using with 2.2.6 (Ted Hyde's ones) lights just go off, and never come back on. If i use the sample you said... lights dont even go off, and gives the errors i passed you. > I would do a fresh (reformat) Jinstall and upgrade to 2.2.8 then we > know what you have (at this point its not clear whether your installation is > corrupted in some way) There is just no reason for this many problems that no > one else is seeing > Why would i do that AGAIN!!!!, i did' it when 2.2.5 to 2.2.6... then as you asked, did it again from 2.2.6 to 2.2.7... and... now again?.. what would change? I have "apt-get remove --purge" and then installed it using apt-get... don't want to start all over again, installing Linux every time something is unknown... I have posted the errors, and the config files, the errors must say you something.., there is something wrong, OK, there you got the debug file.. there must be something writen about. I can't see my own messages or i could put again the pastebin links, but, just search for Ted Hyde's message with his config files and try with them... I'm really tired of this, i have bought something that was supposed to work and work fine, there was no notice about an unstable driver, firmware, testing, nothing about that on 7i43 or i would preferred to go buy other board. Then you said the driver was beeing incomplete, testing and so on... ok, but please tell that before the people buy your hardware. Some time ago you have offered to change the board for a 5i20, i said i was going to test the suppossed to be working Ted Hyde's files... but, they didn't work, so, please, tell me what to do to change this board. I'm really tired and my associate is killing my nerves.(as this board does also) ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
