Jon Elson <el...@...> writes: snip... > > Oh, one big feature I added, with the expert help of Jeff Eppler at the > Fest, was to put an integer lowpass filter on the jog dial to get rid of > the nasty buzzing that the coarse jog dial counts caused. I have used > this on both the Bridgeport and minimill, and it is a great improvement. > The ilowpass component should be on all EMC2 distros since about July 2008. >
Oh oh... Apart from the jog pendant, you just touched on the one aspect of my Kasuga EMC2 conversion that still bugs me. All the axes buzz and moan while holding position, and if I try to adjust the D term or deadband to eliminate this, then my following error causes faults during rapids. Is there a way to use the ilowpass filter to eliminate all the noise my mill makes while at rest? Thanks, Tom ------------------------------------------------------------------------------ This SF.net email is sponsored by: High Quality Requirements in a Collaborative Environment. Download a free trial of Rational Requirements Composer Now! http://p.sf.net/sfu/www-ibm-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
