I did a re-install without allowing the proprietary nVidia driver to be installed and it helped. ... Eventually I have determined I just need a newer machine.
It may not be the elegant answer or the answer I wanted, but it works now. Another option I tried was not using Axis. Being a 'newbie' at it, that was not productive either. I know it is doable without Axis, but Axis is the interface that most effort has been expended on, so it seems to have all the features. ><> ... Jack On Thu, Jun 18, 2009 at 10:01 AM, Richard Acosta <eyela...@gmail.com> wrote: > After some time dealing with LinuxCNC/EMC2 i have obtained a partial > success, but abandoned the project due the ammount of time it takes to > make every step. > Now i'm trying to get into again, and i find a new strange behavior. > > I have this message(log) when trying to start EMC2 with Mesa 7i43, on > the same hardware it was (almost) working. > The only change i have made is the video board, i can't remember the > card used when it worked, but now i'm using a sis 6326 AGP 8MB card. > I cant' get any other card unless nVidia, but i have read about nVidia's > issues. > Even When using a GF2 MX400 or an FX6200 (AGP both) i have this same > message using both VESA or NV drivers. > > Original exception was: > Traceback (most recent call last): > File "/usr/bin/axis", line 3370, in <module> > o = MyOpengl(widgets.preview_frame, width=400, height=300, double=1, > depth=1) > ........ > tkinter.TclError: Togl: X server has no OpenGL GLX extension > > > Here in pastebin > http://pastebin.com/f1d94ec38 > > ------------------------------------------------------------------------------ > Crystal Reports - New Free Runtime and 30 Day Trial > Check out the new simplified licensing option that enables unlimited > royalty-free distribution of the report engine for externally facing > server and web deployment. > http://p.sf.net/sfu/businessobjects > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
