Ok... it seems i need to repeat again
Nvidia proprietary drivers were NEVER installed, AND i'm NOT using an
nvidia card right now.
Original Message:
After some time dealing with LinuxCNC/EMC2 i have obtained a partial
success, but abandoned the project due the ammount of time it takes to
make every step.
Now i'm trying to get into again, and i find a new strange behavior.
I have this message(log) when trying to start EMC2 with Mesa 7i43, on
the same hardware it was (almost) working.
The only change i have made is the video board, i can't remember the
card used when it worked, but now *i'm using a sis 6326 AGP 8MB card*.
I cant' get any other card unless nVidia, but i have read about nVidia's
issues.
Even When using a GF2 MX400 or an FX6200 (AGP both) i have this same
message using both VESA or NV drivers.
Original exception was:
Traceback (most recent call last):
File "/usr/bin/axis", line 3370, in <module>
o = MyOpengl(widgets.preview_frame, width=400, height=300, double=1,
depth=1)
........
tkinter.TclError: Togl: X server has no OpenGL GLX extension
Here in pastebin
http://pastebin.com/f1d94ec38
El 19/06/2009 11:43 a.m., Gary P. Fiber escribió:
> This page talks about Ubuntu and Nvidia
> https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia in 8.04, 7.10
> and 6.06
> Now if the version of Ubuntu supplied with the EMC2 download is
> different from the Ubuntu 8.04 I don't know.
> On my main desktop I use openSuSE 11.1 and Nvidia with no issues.
> My EMC2 machine is a Shuttle KPC-K45 Intel Dual Core cpu at 1.8 GHz with
> 2 gigs of ram using the motherboard video, sorry I don't know off hand
> what video chip set it is it seems to work very well.
>
> Gary Fiber K8IZ
>
> Richard Acosta wrote:
>
>> thanks for your answer Jack but...
>>
>> Nvidia proprietary driveres were never installed, and i'm not using an
>> nvidia card right now.
>>
>> And, i have made both a reinstall and a fresh install and i have the
>> same ressult.
>>
>> It was working fine but with another very old AGP card.
>>
>> I'm using a mesa 7i43 and VIA KT133 mainboard.
>>
>> I was able to read data incoming from encoders when abandoned the
>> project because i couldn't find help to assemble the system properly as
>> i needed.
>> Now i have found a person who seems to be able to make things work as i
>> need, but linux is not working anymore.
>>
>> The thing is, Linux is not working and is saying something about OpenGL,
>> that was never before an issue.
>> I need some help to use a GF2MX200 graphic card, or the currently
>> installed Sis 6326 or at least a list of videocards supported. (that i
>> search and didn't find)
>>
>>
>>
>>
>>
>>
>>
>>
>> El 18/06/2009 6:58 p.m., Jack Coats escribió:
>>
>>
>>> I did a re-install without allowing the proprietary nVidia driver to be
>>> installed
>>> and it helped. ... Eventually I have determined I just need a newer machine.
>>>
>>> It may not be the elegant answer or the answer I wanted, but it works now.
>>> Another option I tried was not using Axis. Being a 'newbie' at it, that was
>>> not
>>> productive either. I know it is doable without Axis, but Axis is the
>>> interface
>>> that most effort has been expended on, so it seems to have all the features.
>>>
>>>
>>>
>>>
>>>> <> ... Jack
>>>>
>>>>
>>>>
>>> On Thu, Jun 18, 2009 at 10:01 AM, Richard Acosta <eyela...@gmail.com> wrote:
>>>
>>>
>>>
>>>
>>>> After some time dealing with LinuxCNC/EMC2 i have obtained a partial
>>>> success, but abandoned the project due the ammount of time it takes to
>>>> make every step.
>>>> Now i'm trying to get into again, and i find a new strange behavior.
>>>>
>>>> I have this message(log) when trying to start EMC2 with Mesa 7i43, on
>>>> the same hardware it was (almost) working.
>>>> The only change i have made is the video board, i can't remember the
>>>> card used when it worked, but now i'm using a sis 6326 AGP 8MB card.
>>>> I cant' get any other card unless nVidia, but i have read about nVidia's
>>>> issues.
>>>> Even When using a GF2 MX400 or an FX6200 (AGP both) i have this same
>>>> message using both VESA or NV drivers.
>>>>
>>>> Original exception was:
>>>> Traceback (most recent call last):
>>>> File "/usr/bin/axis", line 3370, in <module>
>>>> o = MyOpengl(widgets.preview_frame, width=400, height=300, double=1,
>>>> depth=1)
>>>> ........
>>>> tkinter.TclError: Togl: X server has no OpenGL GLX extension
>>>>
>>>>
>>>> Here in pastebin
>>>> http://pastebin.com/f1d94ec38
>>>>
>>>> ------------------------------------------------------------------------------
>>>> Crystal Reports - New Free Runtime and 30 Day Trial
>>>> Check out the new simplified licensing option that enables unlimited
>>>> royalty-free distribution of the report engine for externally facing
>>>> server and web deployment.
>>>> http://p.sf.net/sfu/businessobjects
>>>> _______________________________________________
>>>> Emc-users mailing list
>>>> Emc-users@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>>>
>>>>
>>>>
>>>>
>>> ------------------------------------------------------------------------------
>>> Crystal Reports - New Free Runtime and 30 Day Trial
>>> Check out the new simplified licensing option that enables unlimited
>>> royalty-free distribution of the report engine for externally facing
>>> server and web deployment.
>>> http://p.sf.net/sfu/businessobjects
>>> _______________________________________________
>>> Emc-users mailing list
>>> Emc-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>>
>>>
>>>
>>>
>> ------------------------------------------------------------------------------
>> Crystal Reports - New Free Runtime and 30 Day Trial
>> Check out the new simplified licensing option that enables unlimited
>> royalty-free distribution of the report engine for externally facing
>> server and web deployment.
>> http://p.sf.net/sfu/businessobjects
>> _______________________________________________
>> Emc-users mailing list
>> Emc-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>
>>
>>
>
> ------------------------------------------------------------------------------
> Crystal Reports - New Free Runtime and 30 Day Trial
> Check out the new simplified licensing option that enables unlimited
> royalty-free distribution of the report engine for externally facing
> server and web deployment.
> http://p.sf.net/sfu/businessobjects
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
>
------------------------------------------------------------------------------
Are you an open source citizen? Join us for the Open Source Bridge conference!
Portland, OR, June 17-19. Two days of sessions, one day of unconference: $250.
Need another reason to go? 24-hour hacker lounge. Register today!
http://ad.doubleclick.net/clk;215844324;13503038;v?http://opensourcebridge.org
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
