thanks for your answer Jack but...

Nvidia proprietary driveres were never installed, and i'm not using an 
nvidia card right now.

And, i have made both a reinstall and a fresh install and i have the 
same ressult.

It was working fine but with another very old AGP card.

I'm using a mesa 7i43 and VIA KT133 mainboard.

I was able to read data incoming from encoders when abandoned the 
project because i couldn't find help to assemble the system properly as 
i needed.
Now i have found a person who seems to be able to make things work as i 
need, but linux is not working anymore.

The thing is, Linux is not working and is saying something about OpenGL, 
that was never before an issue.
I need some help to use a GF2MX200 graphic card, or the currently 
installed Sis 6326 or at least a list of videocards supported. (that i 
search and didn't find)








El 18/06/2009 6:58 p.m., Jack Coats escribió:
> I did a re-install without allowing the proprietary nVidia driver to be
> installed
> and it helped. ... Eventually I have determined I just need a newer machine.
>
> It may not be the elegant answer or the answer I wanted, but it works now.
> Another option I tried was not using Axis.  Being a 'newbie' at it, that was
> not
> productive either.  I know it is doable without Axis, but Axis is the
> interface
> that most effort has been expended on, so it seems to have all the features.
>
>   
>> <> ... Jack
>>     
>
>
> On Thu, Jun 18, 2009 at 10:01 AM, Richard Acosta <eyela...@gmail.com> wrote:
>
>   
>> After some time dealing with LinuxCNC/EMC2 i have obtained a partial
>> success, but abandoned the project due the ammount of time it takes to
>> make every step.
>> Now i'm trying to get into again, and i find a new strange behavior.
>>
>> I have this message(log) when trying to start EMC2 with Mesa 7i43, on
>> the same hardware it was (almost) working.
>> The only change i have made is the video board, i can't remember the
>> card used when it worked, but now i'm using a sis 6326 AGP 8MB card.
>> I cant' get any other card unless nVidia, but i have read about nVidia's
>> issues.
>> Even When using a GF2 MX400 or an FX6200 (AGP both) i have this same
>> message using both VESA or NV drivers.
>>
>> Original exception was:
>> Traceback (most recent call last):
>>  File "/usr/bin/axis", line 3370, in <module>
>>   o = MyOpengl(widgets.preview_frame, width=400, height=300, double=1,
>> depth=1)
>> ........
>> tkinter.TclError: Togl: X server has no OpenGL GLX extension
>>
>>
>> Here in pastebin
>> http://pastebin.com/f1d94ec38
>>
>> ------------------------------------------------------------------------------
>> Crystal Reports - New Free Runtime and 30 Day Trial
>> Check out the new simplified licensing option that enables unlimited
>> royalty-free distribution of the report engine for externally facing
>> server and web deployment.
>> http://p.sf.net/sfu/businessobjects
>> _______________________________________________
>> Emc-users mailing list
>> Emc-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>
>>     
> ------------------------------------------------------------------------------
> Crystal Reports - New Free Runtime and 30 Day Trial
> Check out the new simplified licensing option that enables unlimited
> royalty-free distribution of the report engine for externally facing 
> server and web deployment.
> http://p.sf.net/sfu/businessobjects
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
>   

------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables unlimited
royalty-free distribution of the report engine for externally facing 
server and web deployment.
http://p.sf.net/sfu/businessobjects
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to