What has this anyhting to do about what i asked?
El 25/06/2009 10:49 a.m., Stuart Stevenson escribió: > Gentlemen, > My personal preference for installing EMC2 is as follows: > > install a minimum of 256 mb ram > try to use the motherboard video (keep as simple as possible) > in bios - set parallel port to epp (I use Jon Elson's boards and they > require EPP mode) > load Ubuntu (6.06 LTS or 8.04 LTS) (depends on computer hardware) (for my > touch screens I find 6.06 is the easiest to configure) > update Ubuntu version to latest of the version > configure everything in Ubuntu as desired (especially touch screens) > download and run the install.sh for EMC2 > restart computer > start EMC2 from the menu to make sure it will run > stop EMC2 > git (a version) (I prefer trunk) > follow wiki instructions for build prep > go to src directory and configure (I always configure to run in place) > look through the configure results to make sure configure found everything > necessary > if configure did not find everything then install packages to resolve > dependencies and run configure again > when configure has found everything then run 'make' > when make has completed successfully then run 'sudo make setuid' > go to the top level directory of the version you installed > run 'scripts/emc' > EMC2 should start and run > if your touch screen was working before the EMC2 install - it will work now > until you have your machine starting and running reliably you need to start > EMC2 in a terminal so you can see the error messages - after you have your > machine running you can copy the menu icon to your desktop and change the > launch path to your compile version and use your icon to start EMC2 > hth > Stuart > > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
