2009/6/20 Rob Jansen <r...@myvoice.nl>: > how would EMC know how to move back to the last > programmed position/
I don't think it needs to, it will either do the next G0 (which is no problem at all) or do a G1 which might get a bit boring. (and will start from the wrong place). I think that if you are inserting a manual tool change in your code then you know you will be touching off after it, and would know to put in a G0.It is conceptually no different from a tool change at a safe position. (but you have to trust the operator to hand control back at a safe position) -- atp ------------------------------------------------------------------------------ Are you an open source citizen? Join us for the Open Source Bridge conference! Portland, OR, June 17-19. Two days of sessions, one day of unconference: $250. Need another reason to go? 24-hour hacker lounge. Register today! http://ad.doubleclick.net/clk;215844324;13503038;v?http://opensourcebridge.org _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
