2010/9/15 Kirk Wallace <[email protected]> > I have a project that requires being able to locate a scribed line very > accurately(, worm gear cutting without a rotary table). One way to do > this might be to use a microscope with a webcam, then center the line on > an electronic cross-hair. If anyone has done this, your reply could save > me from setting up the experiment myself. If this works, then the issue > is how can I get EMC2 to use the webcam as position feedback. > -- > Kirk Wallace > http://www.wallacecompany.com/machine_shop/ > http://www.wallacecompany.com/E45/index.html > California, USA > > Try this: http://bbs.homeshopmachinist.net/showthread.php?t=27425 You'll find it at this page as well: http://www.cnccookbook.com/CCWishListFutures.htm
I've tried it and it works really well. Regards, Sven <http://bbs.homeshopmachinist.net/showthread.php?t=27425> ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
