On Thu, 2010-09-16 at 09:29 +0200, Slavko Kocjancic wrote: ... snip > I use that: > > http://tinyurl.com/37s4djk* > > *It's just webcam over EMC2. It's not integrated as my programming > knowledge is to low. So I use it to find edges and other things. But I > had to jog machine to precise possition. I like the way to just click > part on image and machine goes there by itself. It's 100% doable but I > can't integrate that in EMC2. Near same thing is in every optical mouse. > And We don't need precission cameras without image distortion. Just > sample image calculate aproximate distance and move then check again and > retry few times. Just like succesive aproximation ADC does. > > Slavko
I know nothing about video software. Does anyone know where the live picture on the screen lives? Can it be accessed? My thinking is, one could have the picture be black and white, add a red pixel for the center, then have a clickable green dot that marks the target. The number of positive or negative, vertical or horizontal pixels from the red dot to the green dot could be used for probing feedback. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
