On 01/02/2011 15:55, Mark Wendt wrote: > Gene, that's the bare vacuum hold-down, going the length > of the Z axis. > The bamboo strips are 3/8" wide, and about 1/4" thick. Once it's all > draw filed and scraped in, I'll be placing a rubber-type gasket on top > of the hold down. And yes, the blades are currently not on the
Mark, if you are going to put a rubber gasket on top of the hold down surface, what is the point of trying to get it flat to the last tenth? I haven't seen anywhere selling rubber or other gaskets guaranteed to that accuracy and the rubber will flex anyway either pulling the work into the saw blade or deflecting it away slightly depending on the accuracy of the set of the blade.. I suspect you're worrying unnecessarily about the accuracy.. Ian __________________ Ian Wright Sheffield UK ------------------------------------------------------------------------------ Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! Finally, a world-class log management solution at an even better price-free! Download using promo code Free_Logger_4_Dev2Dev. Offer expires February 28th, so secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsight-sfd2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
