No, I was actually working with an OEM who sold a sign software package that generated Gcode (very expensive). The problem was that their software generated way too many short segments for no good reason which caused problems on the machine controls (it wasn't LinuxCNC or Mach3). They simply refused to alter their code saying that the machine control "should" be able to handle as many short segments as they want to throw at it and still run at high speeds.
The machine control choked badly (no surprise) and was running 10 or 15% of the desired speed. In the end, I don't think that anything was ever fixed. And the machines still run slowly. I later learned that this is a common stance in the art industry. They expect the machine controller to handle whatever garbage they throw at it. Artists and some of the people associated with artists tend to live in different realm, reality, or dimension. ;-) Logic is oftentimes discarded! Dave On 4/19/2012 3:53 PM, Les Newell wrote: > Dave, > > Is it possible the CAM package had been set up for ridiculously close > tolerances? Maybe it was simply a case of changing a parameter somewhere > to increase the tolerance. > > Les > > On 19/04/2012 19:01, Dave wrote: > >> I agree that there are always cases where curve fitting simply doesn't >> work. But I have seen some large curvy lines in a single plane that >> could have been curve fitted, that spanned over several feet of distance >> that were described as G1 segments that were no more than .005 inches long. >> That is simply bad Gcode. >> >> Dave >> >> > > ------------------------------------------------------------------------------ > For Developers, A Lot Can Happen In A Second. > Boundary is the first to Know...and Tell You. > Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! > http://p.sf.net/sfu/Boundary-d2dvs2 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users