21 квітня 2012 р. 17:56 Viesturs Lācis <viesturs.la...@gmail.com> написав:
> 2012/4/21 Andrew <parallel.kinemat...@gmail.com>: > > > > setp hm2_7i43.0.3pwmgen.00.A-value 1 > > setp hm2_7i43.0.3pwmgen.00.B-value 0 > > setp hm2_7i43.0.3pwmgen.00.C-value 0 > > IMHO these will tell to apply current to a certain winding of the > motor, so it will not move anywhere. > > Viesturs, you're right! But the goal was to test 7i39, if it can power the motor at all. And it can. You might try to setp bldc.0.value to a certain value so that it tells > to move at certain velocity... > > Bldc already works some way, but obviously wrong. Now I'm trying to figure out the motor parameters. That's fun already, instead of dead motor. BTW I figured out that the previous problem was 3pwmgen scale set too high. Andrew ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
