2013/4/1 andy pugh <[email protected]> > On 31 March 2013 12:21, Viesturs Lācis <[email protected]> wrote: > > > And LinuxCNC will switch to joint mode once the commanded move is > finished. > > I placed the config here, if that makes it easier to test it. > > > > www.cutting.lv/fileadmin/user_upload/stepper-gantry.tar.gz > > Thanks for that, it made it much easier to test. > > I stripped it down even further, and ran with only halui and halcmd as > the user interfaces (and I can't say I can recommend that as a way to > control LinuxCNC). > It appears to be a problem in halui when mdi_commands are called. >
Could anyone with actual skills of understanding the code take a look at it or at least share some hints, where to look for the code, responsible for this? Thanks! -- Viesturs If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Minimize network downtime and maximize team effectiveness. Reduce network management and security costs.Learn how to hire the most talented Cisco Certified professionals. Visit the Employer Resources Portal http://www.cisco.com/web/learning/employer_resources/index.html _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
