On 13 April 2013 15:33, Gene Heskett <ghesk...@wdtv.com> wrote: > The bearing nut that is retaining that disk in the same manner I did use to > put one on the lathe, is below those nylon gears in the micro head. The > amount of shaft sticking up isn't sufficient to allow anything above it. > The draw bolts shoulder bottom is actually about 3/16" below the top of the > gearbox cover.
This is the case with mine too, that encoder disc is actually a very thin-walled top-hat. > All the more reason to go get a G0704. I've put enough sheckles in this > sows ear of a mill. I reached the same conclusion. But I decided if I was going to upgrade I was going to get something made in Yorkshire, not China. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
