> Date: Mon, 13 May 2013 15:00:54 -0400
> To: [email protected]
> From: [email protected]
> Subject: [Emc-users] Superglue, or Loc-tite for that motors flywheel?
>
> Gene,
>
> I wanted to be sure that you picked up on the fact that the setscrew
> is inserted ALONG the thread pitch line PARALLEL to the axis of the
> shaft but offset from the shaft axis by the radius of the shaft. So
> it in essence forms a round key that CAN BE removed without applying
> an oxyacetylene torch. Believe me, with all the best intentions you
> will probably want to remove the pulley at some time during the
> fabrication/modification phase.....I certainly did.
>
> PLEASE!!!!! Don't use Locktite. Think about how you are going to
> hold the armature and shaft to keep it from turning so you can
> unscrew the pulley after you have toasted the front bearing and
> probably the windings and commutator.
>
There are many types of locktite. Not all require high heat to remove them.
Chris M
------------------------------------------------------------------------------
AlienVault Unified Security Management (USM) platform delivers complete
security visibility with the essential security capabilities. Easily and
efficiently configure, manage, and operate all of your security controls
from a single console and one unified framework. Download a free trial.
http://p.sf.net/sfu/alienvault_d2d
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
