On 5 July 2013 16:45, Viesturs Lācis <viesturs.la...@gmail.com> wrote:
> 4) I tried to spin the motor in "bldc config=n" with bldc.value 0.15 and > bldc.frequency explicitly set at 0,15 and 3 respectively (motor should > slowly rotate as soon as pwmgen is enabled), but it moves just a very > little and stops; That's odd. Even if the motor has a bad winding or there is a broken power wire it should eventually jerk to a new position. Can you check that you are seeing the expected voltages on the 7i39 outputs? -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
