.75 mm^2 is a light. I probably would have gone with at least 1.25 to 1.5 mm^2, but if you have rung out the cables for continuity, that is not going to keep things from moving. And this setup was working before.. right?
Igus sells some very nice shielded trailing (Hi Flex) cables for reasonable prices. Igus.com / Igus.de. Dave On 7/5/2013 12:53 PM, Viesturs Lācis wrote: > 2013/7/5 alex chiosso<achio...@gmail.com> > > >> Did you use extra flexible cables for the motor supply ? >> >> > I do not understand, what you mean. > > > >> Are the cables fitted inside a cable chain ? >> >> > Yes. > > > >> If yes are you sure that the cable fitting respect the manufacturer >> specifications ? >> > > This is motor datasheet: > http://www.cutting.lv/fileadmin/user_upload/60BLS70A-240-1000Z.pdf<http://cutting.lv/fileadmin/user_upload/60BLS70A-240-1000Z.pdf> > > It is all the data I have for the motor. Can You suggest me, what kind of > cables does the motor need? Currently I have unshielded 0,75 mm^2 > multistrand cable. > > ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
