Anyone have a technical guess why the Intel D525MW boards are not performing well in Germany?
On Sat, Oct 19, 2013 at 5:58 PM, andy pugh <bodge...@gmail.com> wrote: > On 19 October 2013 08:42, Sven Wesley <svenne.d...@gmail.com> wrote: > > > When I bought them there was a long debate about their performance here > at > > the list. With a few tweaks suggested from others I could get them > running > > the thread test at 7000 for a short period of time and all of a sudden > > everything jumped up to a good 26 000, at its best I got one test run to > > stay at 15 000 without stressing it too much. > > Having said that, 26k is no problem at all for an FPGA board based system. > (Though it isn't anything like as good as the numbers normally claimed) > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > October Webinars: Code for Performance > Free Intel webinars can help you accelerate application performance. > Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most > from > the latest Intel processors and coprocessors. See abstracts and register > > http://pubads.g.doubleclick.net/gampad/clk?id=60135031&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
