Hi! I'm trying to get my programs running and I'm having trouble with the motion stuttering. It's not getting near my feed levels, and if I adjust the feed override while it's running it has no effect.
I've set G64 P0, which I think should eliminate motion mode concerns? It's a servo machine running from Gecko 320x drivers, so I guess it could be servo tuning? Is it possible that my polylines are too dense and the motion planner can't keep up? Here's a sample of points, units are mm. The computer is a 2.8 ghz pentium 4 dual core. G1 X-15.850000 Y25.910000 G1 X-15.840000 Y25.750000 G1 X-15.790000 Y25.340000 G1 X-15.730000 Y24.850000 G1 X-15.690000 Y24.530000 G1 X-15.610000 Y24.070000 G1 X-15.590000 Y23.940000 G1 X-15.590000 Y23.930000 G1 X-15.560000 Y23.710000 G1 X-15.540000 Y23.600000 ------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users