On Sun, 4 May 2014 08:52:26 -0400, you wrote:
>The first one resembles the anchoring for the 16mm5 screw used as the Z on >the lathe, 12mm bore and I had yet to get all the end play out of it even >though I have extra shims between the bearings outer races. Poorly made, >so I still have about .0015" of end play. 20 thou better than the OEM screw >& half nut, but still... Only a few ways they can have endfloat. Not tight enough, nut bottoming out on thread, wrong length spacer or bearings in wrong way ;) If they are angular contact bearings and you fit them facing the same way, you get endfloat - Never trust them being correctly assembled out of the box. Steve Blackmore -- ------------------------------------------------------------------------------ Is your legacy SCM system holding you back? Join Perforce May 7 to find out: • 3 signs your SCM is hindering your productivity • Requirements for releasing software faster • Expert tips and advice for migrating your SCM now http://p.sf.net/sfu/perforce _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
