On Mon, 19 May 2014, Viesturs L?cis wrote:
Date: Mon, 19 May 2014 18:17:07 +0300
From: "[ISO-8859-13] Viesturs L?cis" <viesturs.la...@gmail.com>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "Enhanced Machine Controller, (EMC)" <emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] 5i24?
On May 17, 2014 6:58 PM, "Peter C. Wallace" <p...@mesanet.com> wrote:
7I39 5V power
You can check the config by looking at the dmesg list or running
sudo mesaflash --device 5i24 --readhmid
I didnt have any trouble setting the enables on all 6 of the 3pwmgens in
svsttp6_6, I needed to have the fault-inverts set for all 6 pwmgens:
setp hm2_5i24.0.3pwmgen.00.fault-invert true
setp hm2_5i24.0.3pwmgen.01.fault-invert true
setp hm2_5i24.0.3pwmgen.02.fault-invert true
setp hm2_5i24.0.3pwmgen.03.fault-invert true
setp hm2_5i24.0.3pwmgen.04.fault-invert true
setp hm2_5i24.0.3pwmgen.05.fault-invert true
net emcmot.00.enable => hm2_5i24.0.3pwmgen.00.enable axis.0.amp-enable-out
net emcmot.01.enable => hm2_5i24.0.3pwmgen.01.enable axis.1.amp-enable-out
net emcmot.02.enable => hm2_5i24.0.3pwmgen.02.enable axis.2.amp-enable-out
setp hm2_5i24.0.3pwmgen.03.enable true
setp hm2_5i24.0.3pwmgen.04.enable true
setp hm2_5i24.0.3pwmgen.05.enable true
set all 6 enables low (the first 3 only when the axis were enabled just
because I happen to have a 3 axis test file)
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
