in same directory linuxCNC>configs> hm2-servo i found only one folder that indicate hal hm2-servo.hal and there i could not find anything like MIN_FERROR i have emc2 ---2.5---
On Sat, May 31, 2014 at 2:49 PM, andy pugh <bodge...@gmail.com> wrote: > On 31 May 2014 21:30, a k <pccncmach...@gmail.com> wrote: > > > file each axis has > > > > MIN_FERROR=0.002 > > i replace 0,002 with 0,008 - made some trade off and as a result machine > > works very good now. > > That is actually very strange. > > That value only controls what positional error triggers an error. As > far as I know it has no effect on the motion controller or servo loops > at all. > > Can you look in the HAL files and see if the same name (MIN_FERROR) > appears anywhere in any of the HAL files. Normally it wouldn't. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Time is money. Stop wasting it! Get your web API in 5 minutes. > www.restlet.com/download > http://p.sf.net/sfu/restlet > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
