Hi In linuxCNC>configs> hm2-servo>5i20.ini file each axis has
MIN_FERROR=0.002 i replace 0,002 with 0,008 - made some trade off and as a result machine works very good now. On Fri, May 30, 2014 at 4:11 PM, andy pugh <bodge...@gmail.com> wrote: > On 30 May 2014 21:58, a k <pccncmach...@gmail.com> wrote: > > i did increase min error from 0.002 to 0.008 and now no noise machine > > sounds really good. > > "min error" means nothing to me at all. > > Was this an INI file entry? _exactly_ what was it called, and what is > it connected to in the HAL file. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Time is money. Stop wasting it! Get your web API in 5 minutes. > www.restlet.com/download > http://p.sf.net/sfu/restlet > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
