Hi in ini file i think that as default setting for this parameters Ferror=1 min error=0.002 and FF1=1 am i right or no? i am not sure about tune up only with P FF1 and FF2. http://gnipsel.com/linuxcnc/tuning/servo.html it did not work out in my case
On Wed, May 28, 2014 at 12:08 PM, a k <pccncmach...@gmail.com> wrote: > Yes i did check that and they are in set up for differential mode. > ///// > Next will be --4. Make sure that the filter bits of the HostMot2 encoder > counters are set true > How i can check this one? > in which file ? > > > > > On Wed, May 28, 2014 at 10:28 AM, andy pugh <bodge...@gmail.com> wrote: > >> On 28 May 2014 17:59, a k <pccncmach...@gmail.com> wrote: >> >> > which file ? any instruction? >> >> http://www.mesanet.com/pdf/motion/7i33man.pdf >> >> Page 2 >> >> -- >> atp >> If you can't fix it, you don't own it. >> http://www.ifixit.com/Manifesto >> >> >> ------------------------------------------------------------------------------ >> Time is money. Stop wasting it! Get your web API in 5 minutes. >> www.restlet.com/download >> http://p.sf.net/sfu/restlet >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
