On 10 Oct 2014, at 14:25, Viesturs Lācis wrote: > 2014-10-10 16:18 GMT+03:00 Dave Cole <linuxcncro...@gmail.com>: >> I'm sure I am not the only one doing this, so how do others start over >> after a program stop when a g92 offset has been used? > > So far I always taught my customers to use G54, I actually never > thought about using G92 for setting origin of part coordinates. > Is there any reason not to use G54 or whatever part coordinate > systems? That is exactly what they are meant for,
My understand is that while G54 etc are used to set individual co-ordinate systems, G92 is a global offset. It can be quite useful. It can also be useful when you run out of G54-style offsets, although a bit tricky to keep track of where the CP is. Marcus > they are easy to set > with touch-off (there is keyboard shortcut) and can be set with G10 > L20 command as well from MDI or g-code file. > > Viesturs > > ------------------------------------------------------------------------------ > Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer > Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports > Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper > Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer > http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
