also have a look at this document

http://www.tldp.org/LDP/intro-linux/html/sect_03_01.html


On 2014-10-20 13:26, Marshland Engineering wrote:
> Thanks for the info. What you have listed I have done many times before.
>
> Here are some of the other issues
> Wireless drivers, you have to know a bit about Linux to find and install
> them.
> LinuxCNC put files all over the place. I've yet to find any logic in the way
> it works.
> Creating disk partitions is somewhat confusing.
> Funny enough, connection to a windows network is easy. However, one time I
> had a Linux Guru work on my dual boot for 3 hours trying to get Linux to see
> the windows drives.
> So I have to mount them first !!!! Windows users have no idea about
> mounting, or samba etc etc
>
> But most of all I could not get the PID control, my servo drives and motors
> to respond correctly.
> On the setup, some things are not explained in sufficient detail to make a
> valid choice and others don't work.
>
> Linux CNC is like learing another language and it takes time. The G-Code is
> the easy part.
> Needless to say I will be trying again as I think it is better than Mach3
> and I want to add some ladder logic for tool changers etc. My description of
> a Mach 3 interface is, it was created by someone high on LSD.  I tried to
> create my own screens with their utility, but, it too had issues.
>
> This time around I document my issues and hopefully they can be added to the
> current install instructions.
>
> Cheers Wallace
>
>
> ------------------------------------------------------------------------------
> Comprehensive Server Monitoring with Site24x7.
> Monitor 10 servers for $9/Month.
> Get alerted through email, SMS, voice calls or mobile push notifications.
> Take corrective actions from your mobile device.
> http://p.sf.net/sfu/Zoho
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

-- 

Regards /Groete

Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064
QQ 1767394877


------------------------------------------------------------------------------
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://p.sf.net/sfu/Zoho
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to