On 20 October 2014 12:26, Marshland Engineering
<marshl...@marshland.co.nz> wrote:
> But most of all I could not get the PID control, my servo drives and motors
> to respond correctly.
> On the setup, some things are not explained in sufficient detail to make a
> valid choice and others don't work.

This is probably true of _any_ closed-loop servo system. Setting up
the PID is not a specifically LinuxCNC problem, and there are many
guides out there on servo tuning that are not linked to LinuxCNC.

JT has some tutorials on servo tuning:
http://gnipsel.com/linuxcnc/tuning/servo.html


-- 
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto

------------------------------------------------------------------------------
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://p.sf.net/sfu/Zoho
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to