On 20 October 2014 16:21, Charles Buckley <rijrun...@gmail.com> wrote:
> I never use wireless drivers for LinuxCNC. I use wireless to ethernet
> adapters and just let the standard internal ethernet driver handle the
> networking.

This might be the most reliable way, indeed.
My garage network is via homeplug, so all the machines just use
standard wired ethernet. This has the not insignificant advantage that
I can us Wake On LAN to power up a garage PC to drop  G-code files
onto it / fiddle with config files, make sure it is ready to go when I
get there etc

http://www.ebuyer.com/344129-linksys-plsk400-200mbps-4-port-powerline-adapter-kit-plsk400-uk?utm_source=google&utm_medium=products&gclid=CPaWx87Fu8ECFSEOwwod6rAANw


-- 
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto

------------------------------------------------------------------------------
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://p.sf.net/sfu/Zoho
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to