That's good news. Thanks, Dave
On 6/23/2015 12:14 AM, Steve Stallings wrote: > Yes, you can cut the center taps free of each other > and drive it full coil. You might also consider using > half coil depending on how the motor responds. > > All the ones that I have seen are standard connectors > that were hand soldered. Easily modified. > > Steve Stallings > > >> -----Original Message----- >> From: Dave Cole [mailto:[email protected]] >> Sent: Tuesday, June 23, 2015 12:00 AM >> To: [email protected] >> Subject: Re: [Emc-users] TB6600 Stepper Motor Drivers >> >> Hi Steve, >> >> I did not know that. Thanks for the info. So if I cut the center >> taps loose from pin 5 and insulate the individual center taps >> I should >> have all of the coil end connections in the 5 pin DIN plug and I can >> drive with with a standard bipolar driver? >> >> Unless they glued those DIN connectors together or they are >> molded on, >> that should not be a difficult modification. I don't have >> the machine >> as this is for my nephew. The machine is about 10 years old. Any >> idea if they were molding on the DIN connectors back then? >> >> Thanks, >> >> Dave >> >> On 6/22/2015 10:32 PM, Steve Stallings wrote: >>> Are you aware that the original motors are 6 wire unipolar >>> motors with the center taps connected together at the 5 pin >>> DIN plug? While these motors can be used with a bipolar >>> driver, rewiring will be necessary. >>> >>> Steve Stallings >>> >>> >>>> -----Original Message----- >>>> From: Dave Cole [mailto:[email protected]] >>>> Sent: Monday, June 22, 2015 10:05 PM >>>> To: [email protected] >>>> Subject: [Emc-users] TB6600 Stepper Motor Drivers >>>> >>>> Is anyone on the list using some of the TB6600 stepper >> motor drivers >>>> that are listed on Ebay? >>>> >>>> There are some 5A, 50 volt units that are selling for less >>>> than $15 each >>>> with free shipping from China or Hong Kong. >>>> >>>> I need to put together an inexpensive control box for a >> Sherline. The >>>> original control box was lost. >>>> >>>> Dave >>>> >>>> >>> >> -------------------------------------------------------------- >> ---------------- >>> Monitor 25 network devices or servers for free with OpManager! >>> OpManager is web-based network management software that monitors >>> network devices and physical & virtual servers, alerts via >> email & sms >>> for fault. Monitor 25 devices for free with no restriction. >> Download now >>> http://ad.doubleclick.net/ddm/clk/292181274;119417398;o >>> _______________________________________________ >>> Emc-users mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/emc-users >> --- >> This email has been checked for viruses by Avast antivirus software. >> https://www.avast.com/antivirus >> >> >> -------------------------------------------------------------- >> ---------------- >> Monitor 25 network devices or servers for free with OpManager! >> OpManager is web-based network management software that monitors >> network devices and physical & virtual servers, alerts via >> email & sms >> for fault. Monitor 25 devices for free with no restriction. >> Download now >> http://ad.doubleclick.net/ddm/clk/292181274;119417398;o >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ > Monitor 25 network devices or servers for free with OpManager! > OpManager is web-based network management software that monitors > network devices and physical & virtual servers, alerts via email & sms > for fault. Monitor 25 devices for free with no restriction. Download now > http://ad.doubleclick.net/ddm/clk/292181274;119417398;o > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ------------------------------------------------------------------------------ Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical & virtual servers, alerts via email & sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
