On Tuesday 07 July 2015 10:53:44 andy pugh wrote: > On 7 July 2015 at 15:20, Gene Heskett <[email protected]> wrote: > > DesignSpark-PCB is windows only. No windows nachines on the > > property. > > I wasn't really suggesting that you should abandon Eagle, I was saying > that DesignSpark has the facitlity, so Eagle probably does too.
In any event it would be a start from scratch with the new version, I pulled it 6 months or so back and it would not even load the .brd from the lathes old files. ATM, what it does is a shrug. I can wire wrap it smaller and have already. I have not attached its service cable to the BoB but thats going to be relatively easy, and lets me power it from the BoB. Whether I get it done depends on the weather. I need to go get this new disk under construction, and put the deck back under the rider after fixing the linkage that fell off yesterday, and finish the yard's height reduction. And my youngest son and his wife will be here by late afternoon, staying for at least 3 nights. Weather permitting, some time at the range making noise, which means I'll have some brass to refill too. I am convinced that rider hates me. It started off yesterday with a dead battery, both tires on the southpaw side flat, then the deck suspension slipped and dropped the right side to drag on the ground, then the decks shift linkage lost a hair pin clip, so in 4 hours work, I actually got half an hours mowing done. It can't be worn out, its a Craftsman made in 83. ;-) But for the $300 I gave for it, I have doubled the 2 years service that I got out of a new SP Cub Cadet for $400. Never, ever buy a lawn tool with a Kawasaki engine. That one broke internal parts twice while it was still in warranty. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
