On Monday 06 July 2015 13:13:39 andy pugh wrote: > On 6 July 2015 at 18:02, Gene Heskett <[email protected]> wrote: > > I need a vacuum plate to hold this stuff flat, > > Double-sided tape works. Or hot-melt glue (on the stove), then re-melt > to remove.
In my experience, double sided tape will creep. But the milling forces here are probably under 5lbs and every which way, average close to zero. I did consider making a flat from micarta, but if DS tape works, what do I use for sacrificial as I don't expect it to stick terribly well to a piece of marine 5 ply 9/32" thick thats been laying around long enough to grow whiskers from the humidity. We're wet here, wettest year so far in 31 years here in WV. Something above 5.5"/month since February. I have grass 8-10" high in two weeks, so darned wet I'd be making a green puree of it that comes out of the deck chute in grapefruit sized globs. Was dry enough to sneak in an hour or so in the seat yesterday, but the battery was down so has been on an automatic charger all night. We'll see what later today brings. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
