Gentlemen, be careful with Profibus, there are different tastes of it. Especially the one designed for building automation will not very well suit our needs. But, certainly, this is highly professional technology, extremely noise proof even at long distances of several hundred meters. Peter
Am 21.09.2015 12:41, schrieb Karlsson & Wang: >>>> I think your suggestion with the HAL/Arduino library will be the cheapest >>>> possible and more than good for this application, I will try it for sure! >>>> With some small tweaks it will be fine for a Mega board and I should have >>>> enough I/O. >>>> Thanks! >>>> >>>> /S > Profibus have a very common protocol for a long time, sometimes there are > cheap used IO modules available for sale and this is real professional stuff. > Currently however there is no support for profibus in linuxcnc but I have > been working on profibus for a short and plan to add it at soon as there is > enough time. Hopefully it will be soon I just had to learn Chinese and spent > arund three months on it the last year. > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > --- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
