Just looking at the probe routines in the samples and I find a couple of surface mapping routines and a subroutine probe-hole.ngc with no comments so not sure what it does. Tom just shared Cradek's probe routines so I'll look at them for a bit.
JT On 12/14/2015 6:41 AM, Sarah Armstrong wrote: > it looks as if it's the same package you have looked at . done by the guys > over on the russian site > theirs some probe stuff in the ngc folder . > > i have some too that might help , i'll dig them and emails shortly all > being well > > On 14 December 2015 at 12:32, John Thornton <[email protected]> wrote: > >> Crumb, I hit delete on your reply and it does not show up in the trash >> folder... which probe screen are you talking about? >> >> JT >> >> On 12/14/2015 6:02 AM, John Thornton wrote: >>> With a probe on the way and after viewing a few probe screens which seem >>> to all be way to complicated for the job it made me wonder what >>> practical probing routines people would actually use on a mill to >>> machine parts with. I came up with a few but having never probed a part >>> I'm looking for input from those that have probes now. >>> >>> Measuring a part. >>> Measure a hole. >>> Measure a pocket. >>> >>> Re-Machining >>> Locate a hole. >>> >>> Setup >>> Find the top of material. >>> Check that the vise is square. >>> Center the probe stylus. >>> >>> JT >>> >>> >> ------------------------------------------------------------------------------ >>> _______________________________________________ >>> Emc-users mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
