Hmm, well, interesting, the LEDs are flashing wildly in a pseudorandomish-looking pattern. They're all flickering independently, not all on/all off. The 4th one (furthest from the ethernet port), that one looks like it's flickering off VERY briefly then back on once every 2 sec.
"setp hm2_7i92.0.led.CR01 TRUE" in the Show HAL Configuration window for all the CR0x changes nothing, nor does setting FALSE. They're flickering unchanged. When I quit LinuxCNC, the LED nearest the ethernet port goes off, the other 3 are solid-on. Show HAL Configuration->Threads->servo-thread: 1 hm2_7i92.0.read 10 hm2_7i92.0.write So those are there. Danny ---- andy pugh <bodge...@gmail.com> wrote: > On 28 May 2016 at 05:52, Danny Miller <dan...@austin.rr.com> wrote: > No, no LinuxCNC axis moves. If I expand FERROR way out, the display > says it's moving like 0.5" before erroring- but the physical axis never > moves. One way to check if you have Hostmot2 communication would be to try to light the LEDs on the 7i92 board. halcmd setp hm2_7i92.0.CR01 1 This situation sounds a lot like what you might get if the hm2_7i92 read/write functions were not added to a thread. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
