There's bound to be some roller chain size between that and bicycle chain, which would be ideal for your application.
From: Gene Heskett <ghesk...@shentel.net> To: emc-users@lists.sourceforge.net Sent: Wednesday, June 1, 2016 5:20 PM Subject: Re: [Emc-users] drive belt for 7x12 NOT OEM On Wednesday 01 June 2016 16:08:27 Gregg Eshelman wrote: > Might be too small? I think so Gregg. They don't have suitable sprockets with big enough hubs to move the torque I need to move, and there is do data on the tensil strength of the chain itself. So while its cute, its strictly for moving a bit of cardboard IMO. Thanks for the link, it may have been golden. But not for me. > Power animated displays, robotics, model trains and other miniature > mechanisms. Tough, durable, self-lubricating acetal resin chain links > snap apart for easy adjustment. Chain pitch: .1227 inch; width .162 > inch; thickness .082 inch. (Note: Chain sold only in increments of one > foot.) > http://www.micromark.com/miniature-drive-chain-price-per-foot,9716.htm ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users