Good Day all, Loctite 680 and similar products are anaerobic (set with the absence of air) there shear strength ranges up to about 3500 lbs per square inch at up to 180 degree C cheers john
> Date: Sat, 24 Sep 2016 18:38:18 +1000 > From: dva...@internode.on.net > To: emc-users@lists.sourceforge.net > Subject: Re: [Emc-users] Anybody have an idea how... > > On 24.09.16 18:04, john mcintyre wrote: > > Machine the boss and hub to a firm slide fit ( stops misalignment in > > assemble) then use Loctite 680 or similar. prep spay both surfaces > > with activater let dry , then apply Loctite and assemble ( do not > > waste time in assembly) > > An off-thread question: I haven't used any of the Loctite products yet. > Do they set rock-solid in the container as soon as you've opened them to > use one drop? That's what all the hardware-store cyanocrylates do, so I > buy the cheapest two-tube pack, and try to line up three jobs before > opening a tube. > > Erik > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users