On 06/06/2017 03:30 AM, Gene Heskett wrote: > Does the image I downloaded Saturday and wrote to an sd card yesterday > have this stuff in it?
No, you need to pull the most recent source-files (hm2_rpspi.c and spi_common_rpspi.h) from the mailing list (or the forum). Login as pi user and put them in ~/linuxcnc-git/src/hal/drivers/mesa-hostmot2/ Then do: $ cd ~/linuxcnc-git/src $ make $ sudo make setuid $ ../scripts/linuxcnc -v ../../linuxcnc/configs/sheldon-lathe/7i90-axis.ini That should run your sheldon lathe config. You may need to update the config as needed. -- Greetings Bertho (disclaimers are disclaimed) ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users