On Wednesday 23 May 2018 21:33:40 jeremy youngs wrote: > Pin 1 and 3 are my a and b from the 7i42. > I have verified encoder is operational and 4.56 volts at pins 1&2 on > 7i42 so all seems good there. I'm pretty sure this is a syntax problem > . Input ? hal.jpg > <https://drive.google.com/file/d/175TeL3SfHMiQ5zVE2a-lXfxbgVhqeVwS/vie >w?usp=drivesdk>
Now is a good time to familiarize yourself with the halscope. Find out what it can tell you. Also, for rolling the spindle slowly, put a halmeter on that rawcounts signal, it should count up when rolling forward, and down when rolling backwards, if thats backwards, interchange the a & b wires. -- Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
