On Sat, 1 Jun 2019, John Dammeyer wrote:
Date: Sat, 1 Jun 2019 13:22:32 -0700
From: John Dammeyer <jo...@autoartisans.com>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "'Enhanced Machine Controller (EMC)'" <emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] Dual boot for WIN-XP and LinuxCNC
Thanks Andy,
-----Original Message-----
From: Andy Pugh [mailto:bodge...@gmail.com]
Sent: June-01-19 1:02 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Dual boot for WIN-XP and LinuxCNC
On 1 Jun 2019, at 20:52, John Dammeyer <jo...@autoartisans.com> wrote:
Therefore under LinuxCNC I need something with say an Ethernet interface
that has two ribbon cables compatible with PC Parallel port pinout so the
latency isn't an issue
http://store.mesanet.com/index.php?route=product/product&path=69_62&pro
duct_id=306
(Or also look at the 7i80)
http://store.mesanet.com/index.php?route=product/product&product_id=303&search=7I92H
is available (just different connector arrangement, still 2x LPT compatible
pinouts)
That one looks like it would work. Since this could be mounted right above or
beside the PMDX-126 two very short ribbon cables could connect.
Really too bad it's not compatible with MACH3 too. At least I can't find
anything that says it is.
And that it's out of stock.
John
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
